ATL Telecom IP300S - Manual (Page 59)

IP SIP Phone v2 User’s Guide Mar. 2005
[59/100]
reserved by ISP for server feature access).
Please refer to section 8.1 - “Dial Scheme” for LAN dialing, and section 12.5 - “Soft-Switch
(PBX) Feature Access”.
To disable this LAN dial feature:
a. 【 】 Press FUNC 【 】 + # to activate menu.
b. Go to submenu “5. Preferences” / “7.Dial Plan / “3. LAN Dial” to configure this
feature.
1 . E n a b l e d .
2 . D i s a b l e d
c. Alternatively, you may go to web page 『IP SIP Phone』 / 『Preferences』=> “LAN
Dial” to configure it.
Default is enabled.
10.7.4. Call Command
You can configure various call commands, such as Calling Line Identification Restriction
(CLIR), or Calling Line Identification Presentation (CLIP), on a per call basis. Alternative, you
may change server feature access code to fit your local regulation, such as change the “Call
Return” access call from “*69” to “#69”.
You may point web browser to your terminal’s IP and go to page 『IP SIP Phone』 /
『 Preferences』/ 『Call Command』 to configure available call commands.
Subsections below illustrate how to configure them by keypad (TELNET).