ATL Telecom IP300S - Manual (Page 40)

IP SIP Phone v2 User’s Guide Mar. 2005
[40/100]
z To assign a speed dial entry:
„ Position cursor on the text input which you want to assign a speed dial mapping.
„ Click the “Contacts” on the right panel to pick an entry from address book to map
to a specific speed dial entry.
z To clear a speed dial mapping:
„ Position cursor on the text input which you want to clear the speed dial mapping.
„ Click “Clear” collocates with each speed dial entry to remove the mapping.
(4) Perform Speed Dial:
IP SIP Phone supports two different ways to perform speed dial:
i. [0-19] + 【SPD】; e.g., 【 】 1 +【SPD】, or “01” +【SPD】
ii. 【 SPD】+ [00-19]; e.g., 【SPD】+ “01”
Note
: if you want to dial single digit only, such as 【 SPD 】 + 【 】 1 , please press an
additional 【 】 # to finish dialing; otherwise, it will wait for the second digit
until inter-digit timeout, which default is 4 seconds. For example, 【 SPD 】