ATL Telecom IP300S - Manual (Page 31)

IP SIP Phone v2 User’s Guide Mar. 2005
[31/100]
T r y a g a I n l a t t e r
8.1. Dial Scheme
A. Press 【 】 URL to activate alphabets typing via keypad on which time the corresponding LED
will be on, or type numbers directly via DTMF. Press 【MUTE】 to delete typos.
B. The serving domain will appear on the upper-right corner. Press [Domain Switch] to circle the
available service domains. With IP SIP Phone, you could configure up to 3 different service
domains and the default service domain of line-N is service-domain-N. For example, the
default service domain of 【
】 B Call is the 2 nd service domain. If no corresponding service
domain is available, it will use the 1 st service domain by default.
f w d . p u l v e r . c o m
3 2 0 0
C. Press 【 】
# to dial the number immediately, or the phone will dial out the number after 4
seconds (the inter-digit timed-out is programmable).
Method Rule Example
Pick from address
book
1. Enter address book.
2. Search for entry.
3. Press 【
】 Redial
Note: The phone will not use the
domain you specified if the
domain part of the dialing AoR is
different from the one you
specified and “Auto-locate” as
picked domain, based on the
domain part in AoR.
1. sip:[email protected]
2. <sip:[email protected]:3000>
3. Scott<sip:[email protected]>
4.
[email protected] , which is
equal to sip:[email protected]
5. tel:+886-3-5639025
+88635639025, which is equal to
“tel:+886-3-5639025”
ENUM dialing 2
1. Starts with a 【 】 # , which
will be translated as ‘+’ (if
you enter via keypad).
2. Dial numbers including
country code and area code
(Use 【MUTE】 to delete
previous character on typos).
3. Dial 【 】 # to confirm.
To dial “tel:+886-3-5639025”,
please enter “#88635639025#” and
it will show on the LCD as:
C a l l
+ 8 8 6 3 56 3 9 0 2 5
2 ENUM capable DNS must be configured and set as the primary DNS of IP SIP Phone.
sip.isp.com
fwd.pulver.com
Auto-locate