ATL Telecom IP300S - Manual (Page 57)

IP SIP Phone v2 User’s Guide Mar. 2005
[57/100]
A c t i v a t i o n t i m e :
[ 3 0 - 8 6 4 0 0 ] 1 8 0 0
To avoid overflow the network with redial retries, the phone will wait a gap between each
redial (default is 15 seconds). You can configure this redial interval from【MENU】=>
“5.Preferences” / “ 5.Auto-Redial” / “2.Retry Interval”.
R e d i a l I n t e r v a l
[ 1 - 2 5 5 ] s e c 1
5
Alternatively, you may go to web page 『IP SIP Phone』 / 『Preferences』=>
“Auto-redial” to configure it.
10.6. Silently Follow Redirection
You can configure the phone to ask user to confirm the redirection before continuing calling
attempts. For example,
F WD t o x y z @ s o m e w
( 1 = Y , 2 = N ) 1
It will stop making calls whenever it is redirected to somewhere else and the user choose not
to accept the redirection such that the outbound calls are more secure. On the contrary, you may
configure it to automatically follow those redirections until the target number is reached or a loop
(ping-pong redirect) is detected.
The default is to silently follow the redirections on making calls without user’s interference.
To configure Silently Follow Redirection:
a. Press 【 】 FUNC + 【 】 # to activate menu.
b. Go to submenu “5. Preferences” / “6. Accept Divert”.
c. Configure “Accept” or “Reject” redirections on making calls.
d. Alternatively, you may go to web page 『IP SIP Phone』 / 『Preferences』=>
“Follow Redirect” to configure it.
10.7. Dial Plan
10.7.1. Inter-Digit Timeout
You can configure the inter-digit timeout while dialing numbers. The default is 4 seconds. If
you dial the alphabets very often, such as URL, then you may increase the inter-digit timeout to,
say, 6 seconds. While making calls, the first digit timeout is 15 seconds, and the inter-digit timeout
after the first digit is defined here. The phone will dial out the collected digits on timer expired.
To speed up the dial process, press 【 】
# key whenever finishing dial.
To configure inter-digit timeout:
a. Press 【 】 FUNC + 【 】 # to activate menu.
b. Go to submenu “5. Preferences” / “7.Dial Plan / “1. Inter-Digit”.