ATL Telecom IP300S User Manual
Page 32
IP SIP Phone v2 User’s Guide
Mar. 2005
[32/100]
4. Valid ENUM dial strings
must be longer than 6
(configurable) and containing
only digits, optional ‘-‘,
spaces, ‘(‘ or ‘)’, such as
“#886-3 5639025”, “+86 (3)
5639025” or “#8863”.
5. Those not recognized as valid
ENUM dial string will be
dialed “as is” even they start
with a ‘#’. For example,
“#86” will be dialed as
“#[email protected]”.
Intra-domain Dialing
(Both Caller’s &
callee’s SIP
address-of-record must
be the same domain
and both have been
registered).
1. Press 【
】
URL to activate
alphabets typing via keypad,
or type numbers directly via
DTMF (Use 【MUTE】 to
delete previous character on
typos).
2. The serving domain will
appear on the upper-right
corner. Press [Domain
Switch] to change the service
domain.
3. Dial # to confirm.
If the caller is
he could call
by dialing “3200”.
s i p . i s p . c o m
3 2 0 0
Dial “[email protected]”
s i p . i s p . c o m
a l b e r t
Contact Dialing
1. Use ‘*’ as ‘@’.
2. Use ‘*’ as dot, ‘.’.
3. Use “**” as ‘:’ then follows
peer’s SIP UDP port
(optional, but must assigned
whenever the target agent
does not listen on SIP
UDP-5060).
4. Dial # to confirm.
1. Call
3 2 0
0 * 1 9 2 * 1 6 8 * 1 0 * 2 0 0
2.Call
3
2 0 0 @ 1 9 2 *
1 6 8 . 1 0 * 2 0 0 * * 5 0 7 0
3
If the caller does not use default outbound proxy but the callee does, then the conversation may not be hanged up
properly if the callee hangs up first (but the other direction could). This is due to the nature of stateful proxy to reply a
481 “Call/Transaction doesn’t exist” response for those calls whose INVITE messages not flowing through the default
outbound proxy.