H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 116)

15-1
15
Basic Port Configuration
z
The term switch used throughout this chapter refers to a switching device in a generic sense or the
switching engine of a unified switch in the WX3000 series.
z
The sample output information in this manual was created on the WX3024. The output information
on your device may vary.
Ethernet Port Overview
Types and Numbers of Ethernet Ports
Table 15-1 lists the types and numbers of the Ethernet ports available on the WX3000 series devices.
Table 15-1 Description of Ethernet port type and port number
Series
10/100/1000Base-T autosensing Ethernet
ports
1000Base-X SFP ports Extension slots
WX3024 24 4 2
WX3010 8 2 None
WX3008 8 None None
Combo Ports Mapping Relations
An SFP port and its corresponding 10/100/1000Base-T autosensing Ethernet port form a Combo port.
That is, only one of the two ports forming the Combo port can be used at a time.
Table 15-2 shows the
mapping relations between the ports forming the Combo port.
Table 15-2 Mapping relations between the ports forming the Combo port
Series 1000Base-X SFP port
10/100/1000Base-T autosensing Ethernet
port
GigabitEthernet 1/0/25 GigabitEthernet 1/0/22
GigabitEthernet 1/0/26 GigabitEthernet 1/0/24
GigabitEthernet 1/0/27 GigabitEthernet 1/0/21
WX3024
GigabitEthernet 1/0/28 GigabitEthernet 1/0/23