H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 166)

21-5
Task Remarks
Configuring a MAC Address Entry Required
Setting the Aging Time of MAC Address Entries Optional
Setting the Maximum Number of MAC Addresses a Port Can Learn Optional
Disabling MAC Address learning for a VLAN Optional
Configuring a MAC Address Entry
You can add, modify, or remove a MAC address entry, remove all MAC address entries concerning a
specific port, or remove specific type of MAC address entries (dynamic or static MAC address entries).
You can add a MAC address entry in either system view or Ethernet port view.
Adding a MAC address entry in system view
Follow these steps to add a MAC address entry in system view:
To do… Use the command… Remarks
Enter system view system-view —
Add a MAC address entry
mac-address { static | dynamic | blackhole }
mac -address interface interface-type
interface-number vlan vlan-id
Required
z
When you add a MAC address entry, the port specified by the interface argument must belong to
the VLAN specified by the vlan argument in the command. Otherwise, the entry will not be added.
z
If the VLAN specified by the vlan argument is a dynamic VLAN, after a static MAC address is
added, it will become a static VLAN.
Adding a MAC address entry in Ethernet port view
Follow these steps to add a MAC address entry in Ethernet port view:
To do… Use the command… Remarks
Enter system view system-view —
Enter Ethernet port view interface interface-type interface-number —
Add a MAC address entry
mac-address { static | dynamic | blackhole }
mac-address vlan vlan-id
Required