H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 62)

1-2
When configuring a source IP address for Telnet packets, ensure that:
z
The source IP address must be one on the local device.
z
The source interface must already exist.
z
A reachable route is available between the source IP address (or the source interface) specified for
the Telnet server or client and the Telnet client or server.
Displaying Source IP Address Configuration
To do… Use the command… Remarks
Display the source IP address configured
for the Telnet client
display telnet source-ip
Display the source IP address configured
for the Telnet server display telnet-server
source-ip
Available in any view