H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 35)

1-9
Error message Description
Incomplete command The command entered is incomplete.
Too many parameters The parameters entered are too many.
Ambiguous command The parameters entered are ambiguous.
Wrong parameter A parameter entered is wrong.
found at '^' position An error is found at the '^' position.
Command Edit
The CLI provides basic command edit functions and supports multi-line editing. The maximum number
of characters a command can contain is 254.
Table 1-5 lists the CLI edit operations.
Table 1-5 Edit operations
Press… To…
A common key
Insert the corresponding character at the cursor position and move
the cursor one character to the right if the command is shorter than
254 characters.
Backspace key
Delete the character on the left of the cursor and move the cursor
one character to the left.
Left arrow key or Ctrl+B Move the cursor one character to the left.
Right arrow key or Ctrl+F Move the cursor one character to the right.
Up arrow key or Ctrl+P
Down arrow key or Ctrl+N
Display history commands.
Tab
Use the partial online help. That is, when you input an incomplete
keyword and press Tab, if the input parameter uniquely identifies a
complete keyword, the system substitutes the complete keyword
for the input parameter; if more than one keywords match the input
parameter, you can display them one by one (in complete form) by
pressing Tab repeatedly; if no keyword matches the input
parameter, the system displays your original input on a new line
without any change.