H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 32)

1-6
View
Available
operation
Prompt example Enter method Quit method
HWPing
view
Configure
HWPing
parameters
[device-hwping-a123
-a123] Execute the hwping
command in system view.
HWTACAC
S view
Configure
HWTACACS
parameters
[device-hwtacacs-a1
23]
Execute the hwtacacs
scheme
command in system
view.
PoE profile
view
Configure PoE
profile
parameters
[device-poe-profile-a
123] Execute the poe-profile
command in system view.
Smart-link
group view
Configure
smart-link group
parameters
[device-smlk-group1]
Execute the smart-link
group
command in system
view.
Monitor-link
group view
Configure
monitor-link
group
parameters
[device-mtlk-group1]
Execute the monitor-link
group
command in system
view.
Port-group
view
Configure
port-group
parameters
[device-port-group-1]
Execute the port-group
command in system view.
QinQ view
Configure QinQ
parameters [device-GigabitEther
net1/0/1-vid-20]
Execute the vlan-vpn vid
command in Ethernet port
view.
The vlan-vpn enable
command should be first
executed.
Execute the quit
command to return
to Ethernet port
view.
Execute the return
command to return
to user view.
The shortcut key combination Ctrl+Z is equivalent to the return command.
CLI Features
Online Help
When configuring the device, you can use the online help to get related help information. The CLI
provides two types of online help: complete and partial.
Complete online help
1) Enter a question mark (?) in any view on your terminal to display all the commands available in the
view and their brief descriptions. The following takes user view as an example.
<device> ?
User view commands:
boot Set boot option
cd Change current directory
clock Specify the system clock
cluster Run cluster command
copy Copy from one file to another