H3C Technologies H3C WX3000 Series Unified Switches User Manual
Page 623
Advertising
60-8
3) Enable the function of processing flush messages received from VLAN 1 on Switch D.
# Enter system view.
<SwitchD> system-view
# Enable the function of processing flush messages received from VLAN 1 on GigabitEthernet 1/0/2.
[SwitchD] smart-link flush enable control-vlan 1 port GigabitEthernet 1/0/2
4) Enable the function of processing flush messages received from VLAN 1 on Switch E.
# Enter system view.
<SwitchE> system-view
# Enable the function of processing flush messages received from VLAN 1 on GigabitEthernet 1/0/2
and GigabitEthernet 1/0/3.
[SwitchE] smart-link flush enable control-vlan 1 port GigabitEthernet 1/0/2 to
GigabitEthernet 1/0/3
Advertising