H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 585)

58-6
To do… Use the command… Remarks
Configure the automatic test
interval
frequency interval
Optional
By default, the automatic test
interval is zero seconds, indicating
no automatic test will be made.
Configure the probe timeout time timeout time
Optional
By default, a probe times out in
three seconds.
Configure the type of service (ToS) tos value
Optional
By default, the service type is zero.
Start the test test-enable Required
Display test results
display hwping results
[ admin-name operation-tag ]
Required
Available in any view.
For ICMP tests, if no IP address is configured for the specified source interface, the ICMP test will fail; if
a source IP address has been configured with the source-ip command, the source-interface
command cannot change the configured IP address.
2) Configuring DHCP test on HWPing client
Follow these steps to configure DHCP test on HWPing client:
To do… Use the command… Remarks
Enter system view system-view —
Enable the HWPing client
function
hwping-agent enable
Required
By default, the HWPing client function is
disabled.
Create a HWPing test group and
enter its view hwping administrator-name
operation-tag
Required
By default, no test group is configured.
Configure the source interface
source-interface interface-type
interface-number
Required
You can only configure a VLAN interface
as the source interface.
By default, no source interface is
configured.
Configure the test type test-type dhcp
Required
By default, the test type is ICMP.
Configure the number of probes
per test
count times
Optional
By default, each test makes one probe.
Configure the maximum number
of history records that can be
saved
history-records number
Optional
By default, the maximum number is 50.