H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 42)

1-2
Configuration Description
Make terminal services available
Optional
By default, terminal services are available in all
user interfaces
Set the maximum number of lines
the screen can contain
Optional
By default, the screen can contain up to 24 lines.
Set history command buffer size
Optional
By default, the history command buffer can contain
up to 10 commands.
VTY terminal
configuration
Set the timeout time of a user
interface
Optional
The default timeout time is 10 minutes.
Telnet Configurations for Different Authentication Modes
Table 4-3 lists Telnet configurations for different authentication modes.
Table 4-3 Telnet configurations for different authentication modes
Authentication
mode
Telnet configuration Description
None
Perform common
configuration Perform common Telnet
configuration Optional
Refer to
Table 4-2 .
Configure the
password Configure the password
for local authentication
Required
Password
Perform common
configuration Perform common Telnet
configuration Optional
Refer to
Table 4-2 .
Specify to perform
local authentication
or remote RADIUS
authentication
AAA configuration
specifies whether to
perform local
authentication or RADIUS
authentication
Optional
Local authentication is performed
by default.
Refer to AAA in H3C WX3000
Series Unified Switches Switching
Engine Configuration Guide
for
more.
Configure user
name and
password Configure user names
and passwords for
local/RADIUS users
Required
z
The user name and password
of a local user are configured
on the switching engine.
z
The user name and password
of a remote user are
configured on the RADIUS
server. Refer to user manual of
RADIUS server for more.
Manage VTY users
Set service type for VTY
users
Required
Scheme
Perform common
configuration Perform common Telnet
configuration Optional
Refer to
Table 4-2 .