H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 599)

58-20
1 15822 1 0 2000-04-03 04:00:34.6
2 15772 1 0 2000-04-03 04:00:18.8
3 9945 1 0 2000-04-03 04:00:02.9
4 15891 1 0 2000-04-03 03:59:52.9
5 15772 1 0 2000-04-03 03:59:37.0
6 15653 1 0 2000-04-03 03:59:21.2
7 9792 1 0 2000-04-03 03:59:05.5
8 9794 1 0 2000-04-03 03:58:55.6
9 9891 1 0 2000-04-03 03:58:45.8
10 3245 1 0 2000-04-03 03:58:35.9
For detailed output description, see the corresponding command reference.
If you are downloading a file from the server, you do not need to specify an FTP operation type. For
details, see
Configuring FTP test on HWPing client .
HTTP Test
Network requirements
As shown in Figure 58-5 , Switch serves as the HWPing client, and a PC serves as the HTTP server.
Perform a HWPing HTTP test between Switch and the HTTP server to test the connectivity and the time
required to download a file from the HTTP server after the connection to the server is established.
Figure 58-5 Network diagram for the HTTP test
Switch
HWPing Client
IP network
10.1.1.1/8 10.2.2.2/8
HTTP Server
Configuration procedure
z
Configure HTTP Server:
Use Windows 2003 Server as the HTTP server. For HTTP server configuration, refer to the related
instruction on Windows 2003 Server configuration.
z
Configure HWPing Client (Switch):
# Enable the HWPing client.
<device> system-view
[device] hwping-agent enable
# Create a HWPing test group, setting the administrator name to "administrator" and test tag to "HTTP".
[device] Hwping administrator http
# Configure the test type as http.
[device-hwping-administrator-http] test-type http
# Configure the IP address of the HTTP server as 10.2.2.2.
[device-hwping-administrator-http] destination-ip 10.2.2.2