H3C Technologies H3C Intelligent Management Center - Manual (Page 103)

94
2. Click the Device Management tab.
3. Click the Operation icon for a device in the Operation column.
4. Select Interface List.
The interface list page displays a toolbar and an interface list.
Toolbar
{
Enable—Enable SPBM on multiple interfaces (see " Enabling/disabling SPBM on interfaces ").
{
Disable—Disable SPBM on multiple interfaces (see " Enabling/disabling SPBM on
interfaces ").
{
Refresh—Refresh the interface list.
Interface List contents
{
Interface Status—Operating state of the interface:
− Unmanaged—IMC does not manage the interface.
− Unknown—IMC has failed to obtain the interface status.
− Disabled—The interface is administratively disabled.
− Up—The interface is in up state.
− Down—The physical link of the interface has failed.
{
Interface Description—Interface type and number. Click an interface description to view its
interface details. For information about interface details, see H3C IMC Base Platform
Administrator Guide.
{
SPBM Status—SPBM state on the interface:
− Enabled—SPBM is enabled on the interface.
− Disabled—SPBM is disabled on the interface.
{
Operation—Click Disable or Enable in this column to disable or enable SPBM on the interface.
Querying interfaces
1. Access the interface list page.
2. Use one of the following methods:
{
To perform a quick query, enter a partial or complete interface description in the query field,
and click the Query icon
.
{
To perform an advanced query, click the Expand icon next to the query field, specify
query criteria, and then click Query.
Query criteria include the following items:
− Interface Description—Enter a partial or complete interface description.
− Interface Status—Select an interface state.
− SPBM Status—Select an interface-specific SPBM state.
For more information about interface states and interface-specific SPBM states, see " Viewing
the interface list ."
Empty fields are ignored.
The Interface List displays all interfaces that match the query criteria.
Viewing interface details
1. From the navigation tree, select Service > VAN Fabric Manager > LAN Configuration > SPB.