H3C Technologies H3C Intelligent Management Center - Manual (Page 70)

61
{
Delete Zone Database—Click OK to delete the zone database from all FCoE switches in the
VSAN.
Managing zone sets
Zone set management allows you to view, query, add, activate, modify, copy and delete zone sets, and
to add and delete zones in a zone set.
To view zone sets:
1. Click the Service tab.
2. From the navigation tree, select VAN Fabric Manager > SAN Configuration > Fabric
Management.
3. In the fabric resources tree, click Fabric Management > the target fabric name > the target VSAN
name > Zone Sets.
The following menus are available in the zone set list.
{
Add—Click this button to add a zone set to the VSAN.
{
Delete—Click this button to delete zone sets from VSAN.
{
Refresh—Click this button to refresh the zone set list.
Zone set list contents
{
Name—Name of the zone set. Click the name to enter the zone management page for the
zone set.
{
Member Count—Number of zones in the zone set.
{
Member—Zones in the zone set.
{
Operation—Click the Operation icon to display a menu that contains the following
options: Activate, Modify, and Copy.
To query zone sets:
1. Access the zone set list page.
2. Enter a partial or complete zone set name in the query field, and click the Query icon .
To add a zone set:
1. In the zone set list, click Add.
2. Enter a zone set name. The name must be unique in the VSAN.
3. Click OK.
To activate a zone set:
IMPORTANT:
Activating a zone set might interrupt device operation.
1. In the zone set list, click the Operation icon and select Activate from the popup menu.
The Activate option is available only when the zone set you activate contains at least one zone
member.
2. Click OK.