H3C Technologies H3C Intelligent Management Center - Manual (Page 58)

49
Viewing server details
To view server details, click the link for the target server in the server list.
The server details include the following information:
• HBA
{
HBA Card—WWN of the HBA. The WWN address of the HBA is the WWN of the N_Port. If
the HBA has multiple N_Ports, the HBA uses the WWN of one N_Port as the WWN address.
{
Node Name—WWN of the server where the HBA resides.
{
Vendor Name—Vendor of the HBA.
{
Serial Number—Serial number of the HBA.
{
Model—Model of the HBA.
{
Model Description—Model description for the HBA.
{
Hardware Version—Hardware version of the HBA.
{
Driver Version—Driver version of the HBA.
{
ROM or BIOS Version—ROM or BIOS version of the HBA.
{
Firmware Version—Firmware version of the HBA.
{
OS Version—OS name and version of the server where the HBA resides.
{
Maximum Payload—Maximum length of CT payload allowed by the HBA. The CT payload
includes the basic header and extended header of CT packets, but not the FC header.
• N_Port
{
WWN—WWN of the N_Port. The WWN is factory assigned.
{
Supported FC4 Types—FC4 types supported by the N_Port, including: FCP, GS3, IP,
LLC/SNAP, NPV, SNMP, SW_ILS, and VI.
{
Supported Speed—Supported speed of the N_Port in Gbps.
{
Current Speed—Current speed of the N_Port in Gbps.
{
Maximum Frame Size—Maximum frame size allowed by the N_Port.
{
OS Name—Name of the N_Port displayed in the operating system.
{
Host Name—Name of the server where the N_Port resides.
Synchronizing servers
VFM does not synchronize servers separately.
It synchronizes server information when synchronizing FCoE switches (see "
Synchronizing FCoE
switches ").
Managing storage devices
Storage devices provide data storage service in SANs. In the SAN management module of VFM,
storage devices cannot exist independently. To manage storage devices, you must import them to their
corresponding fabrics.
A storage device cannot be directly imported to a fabric. After you import an FCoE switch to a fabric,
the storage devices that register with the switch are automatically imported to the fabric.