H3C Technologies H3C Intelligent Management Center - Manual (Page 146)

137
4. Right-click on the blank area, and select Cancel Viewing multicast Path to de-highlight the
multicast path.
Managing a SAN topology
A SAN topology displays fabric's network devices, servers, storage devices, and the connections
between them.
SAN topology includes the following topologies:
• VSAN view
• Zone view
Accessing a SAN topology
1. Click the Service tab.
2. Select VAN Fabric Manager > VAN Fabric topology from the navigation tree.
The topology window appears, as shown in
Figure 21 .
3. Click the icon next to SAN Topology to expand all SAN topologies.
4. Click a SAN topology, and you are placed at VSAN View by default.
To enter a zone view, see "
Managing a zone view ."
Figure 21 SAN topology