Modifying an spb service, Modifying the configuration of an spb service, E (see – H3C Technologies H3C Intelligent Management Center User Manual
Page 113: Modifying, The name and audit interval of an spb service, Modifying the configuration of an spb, Service, Table 7
104
Alternatively, you can deploy the service later as described in "
."
6.
Click OK.
describes the BEB list items.
Table 7 BEB list items
Item Description
Status
Health status of the device. The information is collected by the IMC Platform. For more
information about health states, see H3C IMC Base Platform Administrator Guide.
Device Name
By default, this field displays the device label and the device IP address. The device label is
assigned in the IMC Platform. The device IP address is the IP address used when the device
was added to the IMC Platform. For more information about device details, see H3C IMC
Base Platform Administrator Guide.
Device Model
Device model information collected by the IMC Platform. If the device model is unknown, this
column displays Unknown SNMP Product.
Deploy Status
Deployment status of all SPB service configuration except for ACs:
•
Undeployed—The SPB service has not been deployed on the device.
•
Normal—The SPB service has been deployed on the device.
Operation
This field contains the following icons:
Add icon
—Add an AC on the device.
Delete icon —Remove the BEB role of the device. The device icon changes to
. As a
result, all ACs on the device are removed.
Modifying an SPB service
Modifying the name and audit interval of an SPB service
1.
From the navigation tree, select VAN Fabric Manager > LAN Configuration > SPB.
2.
Click the SPB Services tab.
3.
In the SPB service list, click the Operation icon
for a service, and then select Modify Basic
Info.
4.
On the 1. Basic Settings tab, modify the service name and audit interval.
{
Service Name—Enter an SPB service name. This name must be unique among all SPB services
in the SPB module.
{
Audit Interval (hours)—Enter the SPB service audit interval.
5.
Click OK.
Modifying the configuration of an SPB service
1.
From the navigation tree, select VAN Fabric Manager > LAN Configuration > SPB.
2.
Click the SPB Services tab.
3.
In the SPB service list, click the Operation icon
for a service, and then select Modify.
4.
On the 1. Basic Settings tab, modify the SPB service settings.
For more information about modifying SPB service settings, see "
When you modify SPB service settings, you cannot change its I-SID.