H3C Technologies H3C Intelligent Management Center - Manual (Page 97)

88
• Viewing SPBM configuration
• Removing devices
To maintain interfaces on SPB devices: perform the following tasks:
• Viewing the interface list
• Querying interfaces
• Viewing interface details
To maintain B-VLAN to ECT algorithm mapping, perform the following tasks:
• Viewing the B-VLAN plan
• Querying B-VLAN to ECT algorithm mappings
• Remapping a B-VLAN to an ECT algorithm index
• Removing B-VLAN to ECT algorithm mappings
To maintain SPB services, perform the following tasks:
• Viewing the SPB service list
• Querying SPB services
• Viewing the topology and details of an SPB service
• Modifying an SPB service
• Deleting SPB services
• Undeploying SPB services
• Auditing SPB services
• Viewing audit details of SPB services
• Changing the state of an SPB service from abnormal to normal
• Performing ECT migration
• Monitoring ACs
NOTE:
Use the SPB service audit feature to test the connectivity between BEBs.
Managing SPB devices
VFM provides the following categories of device management features:
• Basic device management operations, including add, delete, and synchronize.
• SPB configuration, including MST region, B-VLAN and VSI configuration.
• Interface-specific SPB capability management.
Viewing the SPB device list
1. From the navigation tree, select Service > VAN Fabric Manager > LAN Configuration > SPB.
2. Click the Device Management tab.
The tab displays the device management toolbar and all SPB devices.
Toolbar