HEIDENHAIN ND 1100 - Manual (Page 19)

Quadra-Chek ® QC100
1-3
The compact ergonomic design
and adjustable-tilt front panel of
the QC100 allow users to locate
and mount the instrument in a
wide variety of environments to
accommodate nearly any view-
ing requirement. The tilt front
panel can be adjusted and se-
cured in any convenient posi-
tion. Rubber feet on the bottom
prevent slipping when the sys-
tem is not permanently bolted
to a worksurface. Bolt holes are
provided in the mounting stand
that match the pattern of the
QC 1000.
Measurements viewed on the front panel LCD can be transmitted
to an IBM-compatible personal computer over a standard serial
port connection, or to a printer over a parallel or serial port. An
infrared (IRDA) port is also included on the front panel for com-
munication with computers and other infrared-compatible devices.
An optional foot switch and re-
mote keypad are available for
control and data entry when the
user is not close to the front
panel.
You system’s available options and the software version are listed
in the Language screen of the Setup menu. Refer to Chapter 4:
Setup for details.
Available options and
software version
Input/Output connectors