HEIDENHAIN ND 1100 - Manual (Page 27)

Quadra-Chek ® QC100
2-7
Send Y Send Y Send Y Send Y Send Y
Sends the current Y axis data displayed on the DRO screen to a
printer or computer.
Send 2 Send 2 Send 2 Send 2 Send 2
Sends the current X and Y axes data displayed on the DRO screen
to a printer or computer.
NOTE NOTE NOTE NOTE NOTE
The Extra menu includes functions that send data from all
The Extra menu includes functions that send data from all The Extra menu includes functions that send data from all The Extra menu includes functions that send data from all The Extra menu includes functions that send data from all
axes when the QC100 system includes a Z and/or Q axis.
axes when the QC100 system includes a Z and/or Q axis. axes when the QC100 system includes a Z and/or Q axis. axes when the QC100 system includes a Z and/or Q axis. axes when the QC100 system includes a Z and/or Q axis.
Clear (CL) datums Clear (CL) datums Clear (CL) datums Clear (CL) datums Clear (CL) datums
Resets all absolute and incremental datums to machine coordi-
nates.
Min Max Min Max Min Max Min Max Min Max
Configures an axis to accumulate and retain minimum and maxi-
mum measured values until the Finish key is pressed. This is use-
ful for applications such as touch-probe measurements of runout.
Repeat (Rpt) preset Repeat (Rpt) preset Repeat (Rpt) preset Repeat (Rpt) preset Repeat (Rpt) preset
Resets datums to the last preset values.
MC MC MC MC MCS S S S S
Allows the user to clear encoder datums, cross reference marks
and re-establish machine coordinates without cycling the system
power.