Print formats – HEIDENHAIN ND 1100 User Manual
Page 40
Chapter 3
Communications
3-2
Print section of Setup menu:
Print section of Setup menu:
Print section of Setup menu:
Print section of Setup menu:
Print section of Setup menu:
Line terminator: Select carriage return or Carriage
return/Line feed to terminate each line of data.
Print axis labels: Include (or suppress) axis labels in data.
Print axis units:
Include (or suppress) axis units of measure in
data.
P
P
P
P
Ports section of Setup menu:
orts section of Setup menu:
orts section of Setup menu:
orts section of Setup menu:
orts section of Setup menu:
• Baud Rate: 9600
• Parity:
No Parity
• Stop Bits: 2
• Data Bits: 8
In the following, the "v" means to ignore the character it is substi-
tuted for i.e., X, Y, Z, r, d, <, T, R, A, etc.
"d" means digit
"-" is the negative sign
"s" means space
"c" means carriage return
For positive outputs, the space character will be substituted for
the negative sign "-". The leading digits may be spaces.
When a QC100 is shipped from the factory, each output line is
terminated by a carriage return (ASCII 13).
The factory default is the DMS format.
In DMS (degree, minute, second) notation, the printout is as fol-
lows:
Character
Position:
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
Content:
v v s - d d d . d d . d . s s s s s c
Example 1:
<1
4 5 . 0 0 . 0 1
Example 2:
A
- 5 . 2 3 . 0 0
Print formats
Angular formats
Angle format (DMS)