HEIDENHAIN ND 1100 - Manual (Page 56)

Chapter 4 Setup
4-14
Wide Wide Wide Wide Wide: Key 1 or key 2
After the specific key is selected,
the key assignment type is se-
lected using a softkey at the bot-
tom of the LCD.
No assignment will be made,
this will not be a hot key
A key will be assigned by press-
ing one of the front panel keys
A QC100 system function will be assigned by scrolling
and selecting from a list. Functions in the special list
include:
DMS/DD DMS/DD DMS/DD DMS/DD DMS/DD
Toggles the display of angles between degrees, min-
utes and seconds and decimal degrees.
Zero 2 Zero 2 Zero 2 Zero 2 Zero 2
Zeroes the absolute and incremental datums.
NOTE NOTE NOTE NOTE NOTE
The Extra menu includes functions that zero all axes when the
The Extra menu includes functions that zero all axes when the The Extra menu includes functions that zero all axes when the The Extra menu includes functions that zero all axes when the The Extra menu includes functions that zero all axes when the
QC100 system includes a Z and/or Q axis.
QC100 system includes a Z and/or Q axis. QC100 system includes a Z and/or Q axis. QC100 system includes a Z and/or Q axis. QC100 system includes a Z and/or Q axis.
Send X Send X Send X Send X Send X
Sends the current X axis data displayed on the DRO screen to a
printer or computer.
Send Y Send Y Send Y Send Y Send Y
Sends the current Y axis data displayed on the DRO screen to a
printer or computer.
None
Key
Special