HEIDENHAIN ND 1100 - Manual (Page 29)

Quadra-Chek ® QC100
2-9
First-time users should thoroughly understand the preceding por-
tions of this chapter before operating the QC100. The operating
instructions assume a basic familiarity with the process of measur-
ing features, QC100 controls and indicators and the information
presented on LCD screens.
NOTE NOTE NOTE NOTE NOTE
It is assumed that operators have a basic understanding of
It is assumed that operators have a basic understanding of It is assumed that operators have a basic understanding of It is assumed that operators have a basic understanding of It is assumed that operators have a basic understanding of
part fixturing and the geometric probing techniques required
part fixturing and the geometric probing techniques required part fixturing and the geometric probing techniques required part fixturing and the geometric probing techniques required part fixturing and the geometric probing techniques required
for their coordinate measuring devices.
for their coordinate measuring devices. for their coordinate measuring devices. for their coordinate measuring devices. for their coordinate measuring devices.
Location and mounting Location and mounting Location and mounting Location and mounting Location and mounting
Verify that the QC100 is mounted on a stable reliable surface. If it
should fall, it could become seriously damaged or cause injuries
to the user.
P P P P Power cord and plug ower cord and plug ower cord and plug ower cord and plug ower cord and plug
The power cord should not be located where it can be walked on
or create a tripping hazard. Always connect the 3-wire power
plug to a 3-wire grounded outlet. Use of a 2-wire power plug
adapter or any other connection accessory that removes the third
grounded connection creates a safety hazard and should not be
permitted.
P P P P Power surge suppressor ower surge suppressor ower surge suppressor ower surge suppressor ower surge suppressor
A high-quality power surge suppressor should be used to limit the
amplitude of potentially damaging power line transients caused
by the operation of heavy electrical machinery or lightning.
Liquids Liquids Liquids Liquids Liquids
Do not spill or splash liquids on the QC100 enclosure.
Configuration and system setup Configuration and system setup Configuration and system setup Configuration and system setup Configuration and system setup
System configuration and setup should be performed only by tech-
nically qualified supervisors or dealer representatives. Operators
should not attempt to alter the configuration of the QC100.
Preparing for
operation
Safety and other reminders Safety and other reminders Safety and other reminders Safety and other reminders Safety and other reminders