HEIDENHAIN ND 1100 - Manual (Page 75)

5-1
Chapter 5
QC100 Series Options
This chapter describes the QC100 options. These options are avail-
able at the time of equipment purchase or any time afterward.
The installation of some QC100 options may require the system to
be returned to Metronics for reconfiguration of the software and
hardware. For additional information, please refer to the specific
option description.
The Remote Keypad enables the operator to execute hot key func-
tions or simple key presses from up to nine feet away from the
QC100. The keypad is shown on the next page. Please refer to
Chapter 4: Setup for a detailed description of hotkeys.
The Programmable Footswitch has two keys that can be assigned
a variety of hotkey functions. The footswitch is shown on the next
page. Please refer to Chapter 4: Setup for a detailed description
of hotkeys.
Operation of the QC100 is unchanged when using the keypad or
footswitch. Keys can be assigned to perform user-defined func-
tions using hotkeys.
NLEC is a program that automatically corrects for most non-linear
measurement errors. Please refer to Chapter 4: Setup for a de-
tailed description of NLEC.
Remote keypad
Programmable
footswitch
Non-linear error
correction (NLEC)