HEIDENHAIN ND 1100 - Manual (Page 53)

Quadra-Chek ® QC200
4-11
Mach 0 offset
Reversed
Interpolation
Press the softkey softkey softkey softkey softkey for the type of reference mark used by the en-
coder on the selected axis and press the down cursor arrow down cursor arrow down cursor arrow down cursor arrow down cursor arrow or
Enter key Enter key Enter key Enter key Enter key to advance the display and highlight Mach 0 offset Mach 0 offset Mach 0 offset Mach 0 offset Mach 0 offset.
Enter the machine zero offset
for the highlighted encoder into
the Mach 0 offset
Mach 0 offset Mach 0 offset Mach 0 offset Mach 0 offset data field and
press the down cursor arrow down cursor arrow down cursor arrow down cursor arrow down cursor arrow
or the Enter button Enter button Enter button Enter button Enter button to advance
the display and highlight Re- Re- Re- Re- Re-
versed versed versed versed versed.
The normal convention for the display of the polarity of measure-
ments is:
• Motion to the right is positive (X axis)
• Motion up is positive (Y axis)
• Motion up is positive (Z axis)
• Clockwise rotation is positive (Q axis)
The settings for any axis can be
reversed to accomodate the en-
coder requirements of the mea-
suring system being used. Press
the No softkey
No softkey No softkey No softkey No softkey to retain the
polarity for the selected axis, or
press the Y
Y Y Y Yes softkey es softkey es softkey es softkey es softkey to reverse
the polarity of the encoder in-
put. Press the down cursor ar
down cursor ar down cursor ar down cursor ar down cursor ar-----
row row row row row or Enter key Enter key Enter key Enter key Enter key to advance the
display and highlight Interpolation Interpolation Interpolation Interpolation Interpolation.
Press the softkey interpolation softkey interpolation softkey interpolation softkey interpolation softkey interpolation
value value value value value required for the encoder
being used on the selected axis
and press the down cursor ar
down cursor ar down cursor ar down cursor ar down cursor ar-----
row row row row row or Enter key Enter key Enter key Enter key Enter key to advance the
display and highlight Units Units Units Units Units.