HEIDENHAIN ND 1100 - Manual (Page 58)

Chapter 4 Setup
4-16
Use the up or down cursor ar- up or down cursor ar- up or down cursor ar- up or down cursor ar- up or down cursor ar-
row row row row row to scroll the list of 10 Unit
Keys and highlight the desired
key. Unit key number 9
Unit key number 9 Unit key number 9 Unit key number 9 Unit key number 9 is used
in this example.
Press the None softkey None softkey None softkey None softkey None softkey at the
bottom of the LCD if no assign-
ment is required or to remove
an existing key assignment.
Press the K K K K Key softkey ey softkey ey softkey ey softkey ey softkey at the bot-
tom of the LCD to assign a front
panel key. You will be instructed
to press the key that you wish
to assign.
Press the desired front panel key
(Cancel
Cancel Cancel Cancel Cancel in this example). The
new assignment will appear on
the LCD.
Press the Special softkey Special softkey Special softkey Special softkey Special softkey at the
bottom of the LCD to assign a
QC100 function. Use the up or
up or up or up or up or
down cursor arrow down cursor arrow down cursor arrow down cursor arrow down cursor arrow to scroll the
list of functions and highlight
the desired function. Press the
Enter key
Enter key Enter key Enter key Enter key to assign the func-
tion.