Verify that the drive is on the network, Normal operation led states, Devicenet network – Yaskawa CM012 DeviceNet Option Card User Manual
Page 13: Verify that the drive is on the network -8
Installation 1-8
Verify that the Drive is on the Network
Normal Operation LED States
The table below describes the DeviceNet Option Card LED states under normal operation. The DeviceNet Option Card has been properly
connected the DeviceNet network, configured on that network and is properly part of the scan list. The network is currently operational.
DeviceNet Network
The example below refers to a DeviceNet network configured as shown. A Rockwell 1770-KFD module is used to interface a PC to the
DeviceNet network.
Refer to the documentation included with the DeviceNet configuration utility supplied with the DeviceNet Master controller. Verify that the
drive appears on the DeviceNet network at the correct node address.
Fig 1.6 – DeviceNet Network Example
Table 1.5 – Normal Operation LED States
LED
State
Indicates
MOD
On Green
Device Operational
NET
On Green
Link OK/Online and Connected