Yaskawa DSD 406 - Manual (Page 112)

MICROTRAC
DIGITAL
SYSTEM
DRIVES
Electrical Hook-up Addendum
– Field Current Wire Sizing: The recommended conductor for field current ratings between 10.0 Ampere and 16.0
Ampere is 12 AWG. The recommended conductor for field current ratings below 10.0 Ampere is 14 AWG. Use 600
V vinyl-sheathed 105°C wire or equivalent. The recommended torques on the field lugs for 14-10 AWG is 25 in-lbs.
– GND: Recommended conductor size, 2 AWG 600 V vinyl-sheathed for COPPER wire, 1/0 AWG 600 V vinyl-
sheathed for ALUMINUM OR COPPER CLAD ALUMINUM wire. Recommended torque on the GND lug is 50 in-lbs.
– Control Circuit Wire Sizing:
TB1: Recommended conductor size, 22-18 AWG 300 V 105°C vinyl-sheathed wire. Recommended torque
is 3.4 in-lbs.
TB3: Recommended conductor size, < 12 AWG 300 V 105°C vinyl-sheathed wire. Recommended torque
is 5 in-lbs.
TB5: Recommended conductor size, 14 AWG 600 V 105°C vinyl-sheathed wire. Recommended torque
is 3.4 in-lbs.
PAGE 3
TM 6107 Addendum 1 © Copyright 1995 MagneTek, Inc.