Yaskawa DSD 406 - Manual (Page 42)

3 Operation
38 3/21/96
❏ Use the
⇓
key to select the another baud rate.
❏ Press the ENTER key to accept the displayed baud rate. The
DSD 406/412 will begin to initiate transfer sequence.
A message will appear explaining that permanent storage memory is
being erased.
A message will appear explaining that the DSD 406/412 is attempting
to start the program transfer.
General Upload/Download Procedures
❏ Press the ENTER key to accept the transfer of the program.
The current baud rate will be displayed.
19200
eras
l0ad
At this time, the DSD 406/412 is waiting to communicate with the PC.
You will see the LED’s on drive scroll upward to indicate it is ready to
upload. Y Modem protocol will be sent to the serial port in the form of
a ‘C’ character indicating that the transfer can start.
Initiate a Y Modem Batch file transfer from the PC (i.e. for Qmodem
users, press the PgUp key for an upload and select the Y Modem batch
mode).
CAUTION
The communications software must be set up to match
the baud rate of the drive.