Yaskawa DSD 406 - Manual (Page 48)

3 Operation
44 General Upload/Download Procedures 3/21/96
❏ Use the DATA/FCTN key to exit out of the parameter download
without performing any data transfers.
❏ Press ENTER to accept the transfer of the parameters.
The current baud rate
will be displayed.
❏ Use the
⇓
key to select the another baud rate if your terminal
does not support 9,600 baud. The maximum baud rate for a
download is 9,600.
❏ Press the ENTER key to accept the displayed baud rate. The
DSD 406/412 will begin to initiate transfer sequence.
Initiate a Y Modem Batch file transfer from the PC (i.e. for Qmodem
users, press the PgDn key for a download and select the Y Modem
batch mode). The PAC program will assign a name to the downloaded
file.
At this time, the DSD 406/412 is waiting to communicate with the PC.
When the transfer begins, a message will appear showing how much of
the transfer has already taken place. The completion percentage
number counts as more
data is transferred. This
transfer should take
approximately thirty
seconds at 9,600 baud.
GREEN
DATA
78
CAUTION
The communications software must be set up to match
the baud rate of the drive.
9600
CAUTION
The maximum baud rate is different from a program
download.