Casio YA-W72M User Guide - Manual (Page 38)

38
Changing the Margin Settings
z Display settings
These settings can be used to specify the range of movement for the mouse cursor on the
computer screen (the screen projected on the dot screen).
z Paper settings
These settings can be used to specify the settings of the “Paper settings” dialog box (page 39) that
is displayed when you open a file in the PowerPoint Control Mode.
z Paper settings (advanced)
These settings can be used to specify the range of input written with the digital pen on a printed
document with special dot patterns.
Any changes to the above settings are applied when the procedure under “To start a slideshow in the
PowerPoint Control Mode” (page 34) is performed.
To configure display settings
1.
On the PowerPoint Control Mode toolbox, click .
z This will display a “Display settings” dialog box like the one shown below.
z This dialog box specifies the range of movement of the mouse cursor on the computer screen
(currently being projected on the dot screen) when performing operations with the digital pen
on a printed document with special dot patterns.
2.
In the “Top” box, enter a value that specifies the top margin (which limits cursor
movement) as the number of pixels from the top of the computer screen.
z For example, enter 0 if you want the cursor to be able to move up to the top edge of the
computer screen. If you want to limit cursor movement up to 20 pixels from the top edge of
the screen, enter 20.
Clicking (Margin settings) on the PowerPoint Control Mode
toolbox displays a dialog box that can be used to change the
settings described below. These settings apply when using the
digital pen on a printed document with special dot patterns.
Margin settings icon