Casio YA-W72M User Guide - Manual (Page 83)

83
Probable Causes and Required Actions
A landscape orientation source file is being output in portrait orientation, causing parts of the
image to be cut off.
The orientation setting is correct, but the image is still cut off.
Some of the pages in the source file are not printed. (Printing stops part way through.)
I can’t open a PPG file with Interactive Whiteboard for CASIO.
Known Issues
As of February 28, 2013, the issues described below have been confirmed for Dot Pattern Printer for
CASIO (Version 1.0.0.0).
z Printing may not be possible or may not be performed correctly when printing a document that
contains pages of different orientations or different sizes.
z Non-Postscript (GDI) printers support output of A-sizes only.
If you want to output a B-size, use a Postscript printer.
z Printing is not supported with a printer that manages output by users.
z The form of fonts in a printed document with special dot patterns and output PPG file may differ
from the form of the fonts in the source file.
Dot Pattern Printer for CASIO Troubleshooting
Probable Cause Required Action
The “Page size information” check
box is not selected. On the “Dot Pattern Printer for CASIO” dialog box, click [Advanced Settings].
Next, under “Page size information”, select the “Use” check box.
The orientation setting on the
properties screen is not correct. On the print dialog box of the application you are using for printing, click the
button for displaying printer properties (normally [Printer Properties] or
[Properties]). Select the “Layout” tab and then use “Orientation” to select
“Landscape”.
Probable Cause Required Action
The data of the output source file
is outside of the print area. The printed image will be cut off if the data on the pages of the source file is
not within the print area. With the application originally used to create the
source file, edit the content data so it is within the print area.
Probable Cause Required Action
You are attempting to print a file
that has more than 200 pages. A single document with special dot patterns print job can contain up to 200
pages. Divide up the source file so each part is 200 pages or fewer, or specify
the print range (on the “Dot Pattern Printer for CASIO” dialog box) so the print
job does not exceed 200 pages.
Probable Cause Required Action
The resolution specified on the
“Dot Pattern Printer for CASIO”
dialog box is too high. Use a smaller value for the “Resolution” setting on the “Dot Pattern Printer for
CASIO” dialog box.