ProSoft Technology 5201-DFNT-104C - Manual (Page 122)

Reference 104C Version 3 ♦ ProLinx Gateway
Protocol Manual IEC 60870-5-104 Client (Firmware v3.xx)
Page 122 of 139 ProSoft Technology, Inc.
August 4, 2011
6.4.4 Type identifier and cause of transmission assignments
(Station-specific parameters)
Shaded boxes: option not required
Black boxes: option not permitted in this companion standard
Blank boxes: functions or ASDU not used
Mark Type Identification/Cause of Transmission combinations: 'X" if only used in
standard direction, "R" if only used in reverse direction, and "B" if used in both
directions
6.4.5 Basic Application Functions
Station initialization
(Station-specific parameter, mark "X" if function is used)
⌧
Remote initialization
Cyclic data transmission
(Station-specific parameter, mark "X" if function is only used in the standard
direction, "R" if only used in the reverse direction, and "B" if used in both
directions)
⌧
Cyclic data transmission