ProSoft Technology 5201-DFNT-104C User Manual
Page 99
104C Version 3 ♦ ProLinx Gateway
Diagnostics and Troubleshooting
IEC 60870-5-104 Client (Firmware v3.xx)
Protocol Manual
ProSoft Technology, Inc.
Page 99 of 139
August 4, 2011
Tip: Repeat this command at one-second intervals to determine the frequency of program
execution.
Opening the IEC 870-5-104 Client Menu
Press
[
Q
] to view all data associated with the IEC 60870-5-104 Client driver.
Opening the Network Menu
Press [@]
to open the Network menu.
The Network menu allows you to send, receive and view the WATTCP.CFG file
that contains the IP, gateway and other network specification information. For
more information about this submenu, see Network Menu (page 104).
Exiting the Program
Press [ESC]
to restart the gateway and force all drivers to be loaded. The
gateway will use the configuration stored in the gateway's flash memory to
configure the gateway.
5.2.5 Database View Menu
Press [D]
from the Main menu to open the Database View menu. Use this menu
command to view the current contents of the gateway database. Press [?]
to
view a list of commands available on this menu.