ProSoft Technology 5201-DFNT-104C - Manual (Page 127)

104C Version 3 ♦ ProLinx Gateway Reference
IEC 60870-5-104 Client (Firmware v3.xx) Protocol Manual
ProSoft Technology, Inc. Page 127 of 139
August 4, 2011
Test procedure
(Station-specific parameter, mark "X" if function is only used in the standard
direction, "R" if only used in the reverse direction, and "B" if used in both
directions)
B
Test procedure
File transfer
(Station-specific parameter, mark "X" if function is used)
File transfer in monitor direction

Transparent file
 Transmission of disturbance data of protection equipment
 Transmission of sequence of events
 Transmission of sequence of recorded analogue values
File transfer in control direction

Transparent file
Background scan
(Station-specific parameter, mark "X" if function is only used in the standard
direction, "R" if only used in the reverse direction, and "B" if used in both
directions)
⌧
Background scan
Definition of time outs
Parameter Default Value Remarks Selected Value
t
0
30 seconds Time-out of connection establishment 1 to 1000
t
1
15 seconds Time-out of send or test APDUs 1 to 255
t
2
10 seconds Time-out for acknowledges in case of no data
messages (t
2
< t
1
)
1 to 255
t
3
20 seconds Time-out for sending test frames in case of a
long idle time 1 to 300
Maximum range of values for configurable time-outs: accuracy 1 second.