ProSoft Technology 5201-DFNT-104C - Manual (Page 20)

Configuring the Gateway 104C Version 3 ♦ ProLinx Gateway
Protocol Manual IEC 60870-5-104 Client (Firmware v3.xx)
Page 20 of 139 ProSoft Technology, Inc.
August 4, 2011
Time DB Offset
-1 or 0 to 3994
This parameter sets the location in the database where the gateway’s
104C
Client date and time will be copied to.
Note: The following table lists the 12-byte data area placed in the database if the Time DB Offset
parameter is set to a value other than -1:
Byte Length Range Description
0 to 1 2 0 to 59,999 Seconds and milliseconds
2 1 0 to 59 Minutes
3 1 0 to 23 Hour
4 1 Reserved
5 1 1 to 31 Day of the month
6 1 1 to 12 Month
7 to 8 2 0 to 65,535 Year (four-digit format, for example 2005)
9 1 Reserved
10 1 0 or 1 Invalid flag (0 = Valid, 1 = Invalid)
11 1 Reserved
Driver Status Offset
0-3982
Database location of general client driver status data
Disable = -1
Refer to section 6.3 (Server Error and Status Data) for the detailed contents of
the status block.
NOTE: requires 18 registers
Mailbox Offset
0 - 3872
Database offset to the mailbox interface area. This feature is applicable to the
5201-DFNT-104C module. The mailbox allows the DFNT driver to request
specific tasks from the 104 driver such as time update and dynamically sending
commands
Disable = -1
Refer to section 4 (Mailbox feature) for further information about the mailbox
functionality.
The mailbox interface requires 128 database registers.