ProSoft Technology 5201-DFNT-104C - Manual (Page 36)

Configuring the Gateway 104C Version 3 ♦ ProLinx Gateway
Protocol Manual IEC 60870-5-104 Client (Firmware v3.xx)
Page 36 of 139 ProSoft Technology, Inc.
August 4, 2011
2.2.1 From Address
0 to highest Status Data address
This field specifies the beginning internal database register address for the copy
operation. This address can be any valid address in the User Data Area or the
Status Data Area of the gateway.
2.2.2 To Address
0 to 3999
This parameter specifies the beginning destination register address for the copy
operation. This address must always be within the User Data registers area.
Take care to specify a destination address that will not overwrite data that has
been stored in memory by one of the communication protocols running on the
gateway.
2.2.3 Register Count
1 to 100
This parameter specifies the number of registers to copy.