ProSoft Technology 5201-DFNT-104C - Manual (Page 32)

Configuring the Gateway 104C Version 3 ♦ ProLinx Gateway
Protocol Manual IEC 60870-5-104 Client (Firmware v3.xx)
Page 32 of 139 ProSoft Technology, Inc.
August 4, 2011
Qualifier used:
0=Direct execution without select
1=Select executed followed by execute
2=Deselect command
32-BITSTRING SETPOINT (51):
Value:
Value read from database for point specified
Qualifier used:
None used
INTERROGATION GROUP COMMAND (100):
Value:
None used for this command with Database Index parameter ignored.
Qualifier used:
0=Not used
1 to 19 = Reserved by standard
20=Station interrogation (global)
21=Interrogation group 1
22=Interrogation group 2
23=Interrogation group 3
24=Interrogation group 4
25=Interrogation group 5
26=Interrogation group 6
27=Interrogation group 7
28=Interrogation group 8
29=Interrogation group 9
30=Interrogation group 10
31=Interrogation group 11
32=Interrogation group 12
33=Interrogation group 13
34=Interrogation group 14
35=Interrogation group 15
36=Interrogation group 16
37 to 63 = Reserved by standard
64 to 255 = Reserved for special use (private range)
COUNTER INTERROGATION GROUP COMMAND (101):
Value:
None used for this command with Database Index parameter ignored.
Qualifier Used:
Counter Interrogation Group:
0=No counter requested
1=Request counter group 1