ProSoft Technology 5201-DFNT-104C - Manual (Page 125)

104C Version 3 ♦ ProLinx Gateway Reference
IEC 60870-5-104 Client (Firmware v3.xx) Protocol Manual
ProSoft Technology, Inc. Page 125 of 139
August 4, 2011
Command transmission
(Object-specific parameter, mark "X" if function is only used in the standard
direction, "R" if only used in the reverse direction, and "B" if used in both
directions)
⌧
Direct command transmission
⌧ Direct set point command transmission
⌧ Select and execute command
⌧ Select and execute set point command
⌧ C_SE_ACTTERM used note 2
⌧
No additional definition
⌧ Short pulse duration (duration determined by a system parameter in the
outstation)
⌧
Long pulse duration (duration determined by a system parameter in the
outstation)
⌧
Persistent output
⌧
Supervision of maximum delay in command direction of commands and
set point commands
Maximum allowable delay of commands and set point commands