ProSoft Technology 5201-DFNT-104C - Manual (Page 44)

IEC-60870-5-104 Protocol Implementation 104C Version 3 ♦ ProLinx Gateway
Protocol Manual IEC 60870-5-104 Client (Firmware v3.xx)
Page 44 of 139 ProSoft Technology, Inc.
August 4, 2011
3.1 Module Address
The 104C Module gateway is identified at transport level using the IP Address.
3.1.1 IP Address
The 104C Module gateway is identified by a unique IP address on the TCP/IP
network. You must edit the WATTCP.CFG configuration file (or use the
configuration tool) to enter a valid IP address. The following example lists the
default contents of the WATTCP.CFG file:
In this example, the 104C Module gateway is identified by IP address
192.168.0.250 in the IEC-60870-5-104 network, with a netmask (subnet mask) of
255.255.255.0 and a default gateway address of 192.168.0.1.
Remote Server Identification
The remote server is identified first by its IP address which you can enter through
the Client X section: