NETGEAR AV Line M4250 GSM4210PX 8-Port Gigabit PoE+ Compliant Managed AV Switch with SFP (220W) - Manual (Page 430)

7. In the SSM Group Mask field, enter the source-specific multicast group IPv6 address
prefix.
8. Click the Add button.
Your settings are saved. The group is added.
9. To save the settings to the running configuration, click the Save icon.
Delete an IPv6 PIM-SSM group
You can delete an IPv6 PIM-SSM group that you no longer need.
To delete an IPv6 PIM-SSM group:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > IPv6 Multicast > IPv6 PIM > SSM Configuration.
The SSM Configuration page displays.
6. Select the check box for the PIM-SSM group.
7. Click the Delete button.
Your settings are saved. The PIM-SSM group is removed.
8. To save the settings to the running configuration, click the Save icon.
Configure an IPv6 PIM interface
You can configure an IPv6 interface for PIM.
To configure an IPv6 PIM interface:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
Main User Manual 430 Configure Multicast Routing
AV Line of Fully Managed Switches M4250 Series Main User Manual