Checking the ip address of the scansnap (ix1500) – Fujitsu Ricoh Fujitsu ScanSnap iX1400 Document Scanner User Manual
Page 148
Checking the IP address of the ScanSnap (iX1500)
Check the IP address of the ScanSnap on the touch panel.
1.
Click the ScanSnap Manager icon
in the notification area located at the
far right of the task bar and select [Exit] from the
.
a
ScanSnap Manager exits.
2.
Press
on the
of the ScanSnap to display the [Settings]
screen.
3.
Press
to display the [Wi-Fi settings] screen.
4.
Check that the name of a network which is currently connected, is displayed
in [Access point connection]
If [Access point connection] is disabled or if a network name is not displayed, refer to
"Connecting the ScanSnap to a Computer in Access Point Connect Mode (iX1500)" (page 120)
and connect the ScanSnap to a wireless access point.
5.
Press [Wi-Fi information] to display the [ScanSnap information] screen.
6.
Check the [IP address] in the [Network] tab.
Registering a Certificate/ Checking the Wireless LAN Settings (iX1500)
148