Checking the mac address of the scansnap (ix1500) – Fujitsu Ricoh Fujitsu ScanSnap iX1400 Document Scanner User Manual
Page 150
Checking the MAC address of the ScanSnap (iX1500)
Check the MAC address of the ScanSnap on the touch panel.
1.
Click the ScanSnap Manager icon
in the notification area located at the
far right of the task bar and select [Exit] from the
.
a
ScanSnap Manager exits.
2.
Press
on the
of the ScanSnap to display the [Settings]
screen.
3.
Press
to display the [Wi-Fi settings] screen.
4.
Check that [Wi-Fi connect mode] is set to [Access point connection] or
[Direct connection].
If [Wi-Fi connect mode] is set to [Wi-Fi off], press [Wi-Fi connect mode] and set it to [Access
point connection] or [Direct connection]
5.
Press [Wi-Fi information] to display the [ScanSnap information] screen.
6.
Check the [MAC address] in the [Network] tab.
Registering a Certificate/ Checking the Wireless LAN Settings (iX1500)
150