Incorrect – Fujitsu Ricoh Fujitsu ScanSnap iX1400 Document Scanner User Manual
Page 218
Incorrect
Pick Roller's Width
l
Adjust the side guides to the widest document. If the side guides are not adjusted properly, a
paper jam may occur.
l
Load smaller documents so that they can be scanned straight.
If the documents are skewed during scanning, the following problems may occur:
-
Part of the document does not appear in the scanned image
-
Slant lines appear in the scanned image
-
The documents are scanned in a wrong paper size
If the documents are not scanned straight, it is recommended that you select the [Continue
scanning after last page] checkbox in the [Scanning] tab of the
, separate the documents by their widths, and scan them in different batches.
9.
Press the [Scan] button on the ScanSnap to start a scan.
ATTENTION
Do not perform the following operations during scanning. Doing so will stop scanning.
l
Connect or disconnect the ScanSnap and other USB devices.
l
Close the ADF paper chute (cover).
l
Switch users.
l
Allow the computer to enter sleep mode.
a
The [Scan] button on the ScanSnap flashes in blue while the documents are being
scanned.
The [ScanSnap Manager - Image scanning and file saving] window appears.
Scanning Documents with iX500
218