Fujitsu Ricoh Fujitsu ScanSnap iX1400 Document Scanner - Manual (Page 158)

Changing the Frequency for Connecting the ScanSnap (iX1500)
Change the setting of the frequency for connecting the ScanSnap which is used when the scanner is
connected to a wireless access point.
HINT
In some regions, a 5 GHz wireless LAN cannot be used.
If you are using the ScanSnap in the region where a 5 GHz wireless LAN cannot be used, you cannot
change the frequency for the connection.
1.
Click the ScanSnap Manager icon in the notification area located at the
far right of the task bar and select [Exit] from the "Right-Click Menu" (page
86) .
a ScanSnap Manager exits.
2.
Press on the touch panel of the ScanSnap to display the [Settings]
screen.
3.
Press to display the [Wi-Fi settings] screen.
4.
Press [Access point connection] to display the [Access point connection]
screen.
5.
Press [Frequency for the Connection] to change the frequency for the
connection.
6.
Press to return to the home screen.
Changing the Wireless LAN Connection Method (iX1500)
158