Replacing the pick roller assembly (s1300i) – Fujitsu Ricoh Fujitsu ScanSnap iX1400 Document Scanner User Manual

Page 475

Advertising
background image

Replacing the Pick Roller Assembly (S1300i)

Replace the pick roller assembly in the following procedure:

1.

Unplug the power connection cable (power cable or USB bus power cable)
from the power supply source (AC outlet or computer).

2.

Remove any documents from the ADF paper chute (cover).

3.

Pull the ADF release tab towards you to open the ADF top section.

ADF Paper Chute (Cover)

ADF Release Tab

ADF Top Section

4.

Remove the sheet guide.

While holding the squeeze clip on the right end and pressing it inward, lift the sheet guide to
remove it.

Squeeze
Clip

Squeeze
Clip

Sheet Guide

5.

Turn the bushing that is on the left.

Replacing Consumables for S1300i

475

Advertising