Fujitsu Ricoh Fujitsu ScanSnap iX1400 Document Scanner - Manual (Page 167)

Using a DNS Server for the Internet Connection (iX1500)
When an IP address is set for the ScanSnap, the setting for using a DNS server can be configured
on the ScanSnap.
1.
Click the ScanSnap Manager icon in the notification area located at the
far right of the task bar and select [Exit] from the "Right-Click Menu" (page
86) .
a ScanSnap Manager exits.
2.
Press on the touch panel of the ScanSnap to display the [Settings]
screen.
3.
Press to display the [Wi-Fi settings] screen.
4.
Press [Access point connection] to display the [Access point connection]
screen.
5.
Press [DNS Server] to display the [DNS Server] screen.
6.
Turn on [Use of DNS Server].
7.
Press the input field for [Primary DNS], enter the IP address of the primary
DNS server, and then press [OK].
8.
Press the input field for [Secondary DNS], enter the IP address of the
secondary DNS server, and then press [OK].
9.
Press to return to the home screen.
Access Point Connect Settings (iX1500)
167