Fujitsu Ricoh Fujitsu ScanSnap iX1400 Document Scanner - Manual (Page 463)

a It clicks when it returns to its original position.
8.
Connect the power cable to the AC outlet, and turn on the ScanSnap.
9.
Reset the Roller Set counter.
1. Press on the touch panel to display the [Settings] screen.
2. Press to display the [Maintenance] screen.
3. Press [Check consumable status] to display the [Check consumable status] screen.
4. Press the [Reset] button.
5. When a message is displayed, press the [OK] button.
a The value of the current count for the [Current Count / Replacement Cycle] is set to "0".
Replacing Consumables for iX1500
463